ماشین های تر کش
ماشین ترکش جهت کشش انواع مفتولهای فولادی
SLIP WET Drawing Machines
Drawing machine with four shafts in line, rotating dies and built – in Dancer.
Slip wet drawing machine for carbon steel wire
FEATURES AND PERFORMANCE
Max. inlet wire diameter: 2.50 mm
Min. outlet wire diameter : 0.40 mm
Number of steps : 12 (11+1)
Pre – setting for dry die
Max. speed: 20 m/s
Section reduction per step: 15%
Submerged cones wiredrawing system with 4 horizontal
Shafts standard – coated with tungesten carbide
Fully rotating die system
Belt transmission
Standard 90 Kw motor
Drawing bobbin with ceramic coating
• Compensator built in the machine frame
Lubrication / Cooling fluid circulation by pump and tube
nest heat exchanger
Skin - Pass Block
The wire is drawn by hard capstan having a dia. of 300 mm
It has a rotating die holder fixed on the frame, the wire
coming out from the capstan enters a dancer which
synchronizes the speed with the following winder.
FEATURES AND PERFORMANCE
Range of diameters: 0.8 + 2.00 mm
Motor power max : 22 kw
Rotating die holder with the possibility to adjust cast and
helix: included
Oil cyrculating system: included
Capstan surface treatment: tungsten carbide
Dancer after the capstan: included